1968 Chevrolet Camaro RS Custom 1968 Chevrolet Camaro RS Custom Pro-Touring Restomod Convertible LS engine Auto


This is a very unique car. Camaros have been modified for years so I wanted to do something different but tasteful. A 1959 Impala has the best looking dash of all times so I removed the Camaro dash frame then modified a dash out of a 1959 Impala to fit. Removing 3″ from the center and 1″ from each end as well as several inches from the windshield area. The original radio face plate was narrowed 3″ then re-chromed. The radio face plate is removable to use the Vintage Air center duct, two side vents were fabricated to look like the gauge cluster. The gauges were replaced with Classic Instrument Gauges that were set up for the LS engine and 4l60E trans. A square back bench seat was modified to fit, the rear seat was modified for the 1959 Impala rear speaker grill then both seats were covered with NOS 1959 Impala cloth, custom door panels were made and Impala arm rests were installed. A column shifted tilt column was installed with a smaller 1959 steering wheel. The trunk area has been finished with the same material The front sub frame was replaced with a tubular frame and control arms from Total Cost Involved. The rear leaf springs were replaced with a 4-link from Ride Tech. The rear gears are 3:42 with a new posi unit. The car rides on shock wave air ride suspension, The rear frame rail were moved in as well as the rear inner wheel wells to accommodate the 315/35/17 tire. The car stops with 4 wheel power disk brake and has power rack and pinion steering The convertible top is power and is covered with Haartz Cloth, a zip down one piece glass rear window was installed and has a matching boot to cover the convertible top when it is down.The LS1 Engine is stock with a LS6 Intake Manifold, custom painted coil covers were installed, fuel tank is from Tanks and has a in tank fuel pump for the Fuel Injected Engine. The exhaust system was custom mandrel bent made from stainless, Magnaflow mufflers were installed. The body was block sanded and all gaps were corrected, the car was painted with PPG DBC Bronze Fire Metallic then Clear Coated, The RS head lights are still vacuum operated and work fine, all wiring is new and updated. This car starts- stops and drive good. No Corners were cut when car was being built, Over $100,000.00 invested also have photos of the build. This car has been done since 2015, it has received Goodguys and NSRA Pros picks and get attention when ever it is out, reality is I have to many cars and this is not driven much so it is one of several I will be sellingPlease contact me to arrange inspection at 410-218-8806 NOT Looking For ANY Trades

1968 Chevrolet Camaro RS Custom 1968 Chevrolet Camaro RS Custom Pro-Touring Restomod Convertible LS engine Auto
1968 Chevrolet Camaro RS Custom 1968 Chevrolet Camaro RS Custom Pro-Touring Restomod Convertible LS engine Auto
1968 Chevrolet Camaro RS Custom 1968 Chevrolet Camaro RS Custom Pro-Touring Restomod Convertible LS engine Auto





Price And More Info!
July 10, 2020 5:15 am




 
I want more stuff like this!
Sign up for the LegendaryFind daily email, and never miss out on our legendary finds.


By submitting above you agree to the LegendaryFind privacy policy.